If you’re looking out for a world-class router service provider then Arris Routers are worth considering. It provides fast internet speed and a stable network at economical prices. The web-based setup feature of the Arris router lets you configure the network settings as per your requirements.

Though the Arris Routers provides the best services, it would not be right to think that there are no errors with them. If you come across any troubles while setting up the Arris network, follow this guide to troubleshoot any problems.

How to set up the Arris Router?

To set up the Arris Router follow the given procedure

• Connect your laptop or PC to any of the internet ports available at the back of your Arris Router using Ethernet Cable.
• Now, connect the modem to Wan Port using the another Ethernet Cable.
• Check and verify if all the connections are properly made.
• Turn off all the devices and turn them on again and wait for the changes to take place.

Stepwise Guide to Arris Router Login

Now, that you have set up your Arris network, let’s look at the procedure to log in to Arris Router settings.

• Connect to Arris Network

To login to your Arris Router web-based setup page, you need to make sure that your device is connected to the Arris network either through a wireless connection or through a wired ethernet cable connection.

• Go to Arris router Web-based setup page

Navigate to Arris Router IP address 192.168.0.1 or 192.168.1.254. The Ip address can vary for different Ariss router model.

• Enter Default Ariss password and username

Once you have been directed to the Ariss web-based setup page, enter the default Ariss credentials that is ‘admin’. If this username and password don’t work lookout for them in the side or backside of the router.

How to change the default Ariss password and username?

To change the default Ariss credentials, follow the given procedure

• Open your web browser and make sure it is connected to the Ariss network either through a wireless connection or through the wired ethernet connection.
• Navigate to Arris Router IP address 192.168.0.1 or 192.168.1.254. The Ip address can vary for different Ariss router model.
• A login page will appear on the screen and you’ll be asked to enter the username and password. Enter the default Ariss password and username; ‘admin’.
• Once you have logged in to the Ariss web-based setup page, go to the Status Security Option.
• On the Status Security Page, enter your new password and username and make sure to write it down somewhere so that you don’t forget it.
• Hit the apply button for changes to take place.

How to Restore Ariss Router Default Settings?

To reset your Ariss Router or restore factory default settings, you can follow two approaches. The first approach is through using the ‘Reset button’. To know how to reset the router through the ‘Reset’ button, follow the given procedure.

• Locate the reset button which is usually like a pinhole at the backside of your Ariss Router.
• With the help of a pin or something similar to that sort, press and hold the reset button for a minimum of 15 seconds and then release it.
• You’ll notice a green or a white light or any stable light. This light indicates that your default settings have been restored.’

The other way to reset your default settings is through a web-based interface. The web-based interface acts as a control panel to make alternations with the network settings as per your requirements. This method is a bit complicated but with proper guidance, you can reset your browser through this method. To reset your Ariss router settings, follow the given procedure.

• Open your web browser that is connected to the Arris Router through a wireless connection or through the ethernet cable.
• Depending upon your Arris router model, go to the IP address. The most common IP address is 192.168.0.1 or 192.168.1.254. The Ip address can vary for different Ariss router model.
• Once you have logged in go to the ‘utility’ option.
• Go to the factory reset open and change the device to default settings.
• Wait till it restores your default settings.

If you are facing any trouble with your broadband speed, you can modify default settings. Once you have logged in to your Arris router setup page, you can make changes as per your requirements. Make sure you have a stable connection while making these changes.